Wallpaper is the boldest way to spice up any room in your space. We recommend ordering a sample of our wallpaper and using a professional to install as it can get tricky if you’re not a pro!
- Sample: 8 in x 10 in
- Design Scale: Medium
- Design Repeat: 20.8 in/ 53 cm
- Roll Width: 20.5 in / 52 cm
- Roll Length: 11 yards / 10 meters
- Roll Area: 56 ft2 / 5.2 m2
- Wallpaper is non-returnable
- Professional install recommended
- Recommend on smooth surfaces
- Requires paste – we recommend using romans 880 clear adhesive as the paste.
- After calculating, we always recommend buying one extra roll JUST IN CASE. We print in small lots and cannot guarantee that between lots there will be a 100% color match
- Made in the USA
PREPARATION
- The wall surface should be clean, dry, smooth and free from mildew
- Wall surfaces should be primed with a wallcovering primer
HANGING INSTRUCTIONS
- These wallcoverings are inspected and tested – however, they should be checked for defects before hanging
- Hanging instructions are included in every roll
- Measure from a corner of the room or 1″ less than the width of the product and a draw a vertical line using either a level or a plumb line
- Measure height of the wall and cut the strip allowing an extra 2″ at both the top and bottom. Before cutting the second strip examine the pattern match in order to avoid unnecessary waste.
- Following paste manufacturer’s directions, apply paste directly to wall using a paint roller on the main wall and a brush in corners, near ceilings, baseboards, windows and doors. Apply enough paste to cover at least 2″ more than the width of the product.
- Apply dry product strips directly to pasted wall.
- Trim excess paper at top and bottom using a straight edge and razor knife
- Apply remaining strips following steps 4-6 ensuring pattern match is correct before smoothing.

















Reviews
There are no reviews yet.